Labotemp UV Fluorescence Sulfur Analyzer LSA-102 is a high-sensitivity total sulphur analyzer designed for accurate determination of total sulfur content in petroleum products, fuels, natural gas, LPG, light hydrocarbons, aromatic hydrocarbons, and other related materials. Based on the ultraviolet fluorescence method, the analyzer converts sulfur compounds into sulfur dioxide (SO₂) through high-temperature oxidation and measures the resulting UV fluorescence using a photomultiplier tube. The fluorescence intensity is proportional to the sulfur content, enabling reliable quantitative analysis.
Designed for efficient laboratory testing, the UV Fluorescence Sulfur Analyzer LSA-102 features high-sensitivity detection, adjustable photomultiplier tube voltage, and flexible single-point or multi-point calibration. Its USB communication interface supports 24-bit data acquisition, while the software provides convenient data processing and analysis. Test data can be stored, accessed, and printed as required, supporting efficient laboratory record management. The system is suitable for petroleum, petrochemical, fuel quality control, natural gas, and research laboratories requiring dependable sulfur analysis by UV fluorescence.
Why Choose Labotemp UV Fluorescence Sulfur Analyzer LSA-102?
✓ UV Fluorescence Technology: Provides sensitive total sulfur determination through SO₂ fluorescence measurement.
✓ Wide Testing Applications: Suitable for fuels, petroleum products, natural gas, LPG, and hydrocarbons.
✓ Efficient Data Management: USB communication, data storage, processing, access, and printing support streamlined laboratory workflows.
| No. | Specification | Value |
|---|---|---|
| General Specifications | ||
| 1 | Specification | Value |
| 2 | Product Type | UV Fluorescence Sulfur Analyzer |
| 3 | Analysis Method | Ultraviolet Fluorescence Method |
| 4 | Measurement Principle | Sulfur compounds are converted to sulfur dioxide (SO₂), followed by UV fluorescence detection |
| 5 | Detection Component | Photomultiplier Tube (PMT) |
| 6 | PMT Voltage | Adjustable |
| 7 | Calibration | Single-point or multi-point calibration |
| 8 | Data Acquisition | 24-bit |
| 9 | Communication Interface | USB |
| 10 | Data Management | Data storage, access and printing |
| 11 | Software Compatibility | Supports current operating systems |
| 12 | Sensitivity | Minimum detection signal greater than 1 micromol |
| 13 | Sample Preparation | High-temperature cracking and oxidation |
| 14 | Drying System | Membrane dryer for removal of water from carrier gas |
| 15 | Voltage | 110V/60Hz 220V/50Hz |
| 16 | Packaging Dimension | 84*62*88cm |
| 17 | Gross Weight | 85Kg |
| Applicable Standards | ||
| 18 | SH/T 0689-2000 | Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products by Ultraviolet Fluorescence Method |
| 19 | ISO 20729:2017 | Determination of Sulfur Compounds in Natural Gas – Determination of Total Sulfur Content by UV Fluorescence Method |
| 20 | GB/T 34100-2017 | Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products by UV Fluorescence Method |
| 21 | ASTM D6667-2010 | Standard Test Method for Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gas by Ultraviolet Fluorescence Method |
| 22 | ASTM D7183 | Standard Test Method for Total Sulfur Content in Aromatic Hydrocarbons and Related Compounds by Ultraviolet Fluorescence Method |
| 23 | ASTM D5453-2016 | Standard Test Method for Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuels, Diesel Engine Oils, and Engine Oils by Ultraviolet Fluorescence Measurement |
| 24 | DB51/T 1689 | Determination of Total Sulfur Content in Liquefied Petroleum Gas (LPG) by UV Fluorescence Method |
| 25 | EN ISO 20846:2012 | Petroleum Products – Determination of Sulfur Content in Motor Vehicle Fuels – Ultraviolet Fluorescence Analysis Method |
| 26 | ISO 20846:2011 | Petroleum Products – Determination of Sulfur Content in Automotive Fuels |
| 27 | BS EN 15486:2007 | Determination of Sulfur Content in a Mixed Component of Ethanol Petroleum |
| 28 | GB/T 11141-2014 | Determination of Trace Sulfur in Industrial Light Olefins |
| 29 | GB/T 17930-2016 | Automotive Gasoline |
Petroleum & Petrochemical Laboratories: Used for determining total sulfur content in petroleum products, light hydrocarbons, engine fuels, and other oil products.
Fuel Quality Testing: Supports sulfur analysis in gasoline, diesel, automotive fuels, and engine oils for quality control and standardized testing.
Natural Gas Analysis: Used to determine sulfur compounds and total sulfur content in natural gas using the UV fluorescence method.
LPG Testing: Suitable for determining total sulfur content in liquefied petroleum gas (LPG).
Aromatic Hydrocarbon Analysis: Used for total sulfur determination in aromatic hydrocarbons and related compounds.
Industrial Light Olefin Testing: Supports trace sulfur determination in industrial light olefins.
Ethanol & Petroleum Testing: Used for sulfur content determination in mixed ethanol-petroleum components.
Research & Quality Control Laboratories: Suitable for standardized sulfur analysis, product evaluation, and quality-control testing of hydrocarbon and petroleum samples.
