Labotemp High Temperature Forced Air Drying Oven FOV-31 provides controlled heating and drying for laboratory applications requiring forced-air circulation. With a 150 L chamber capacity, this oven operates from room temperature +20°C to 600°C. Forced convection circulates heated air throughout chamber, supporting temperature-controlled drying and heating processes. Temperature resolution reaches 0.1°C, with temperature motion of ±0.5°C and temperature uniformity of 2.50%. Chamber capacity accommodates up to seven shelves, with a maximum load of 15 kg per rack and 45 mm shelf spacing.
SUS309S stainless steel inner chamber, cold-rolled steel exterior with electrostatic-sprayed finish, and alumina silicate fibre insulation form its construction. A SUS304 stainless steel electric heat tube provides heating, supported by a high-temperature-resistant circulating fan and ceramic fibre door seal. Two-section PID temperature control offers touch-button setting, with measured temperature displayed on the upper LCD row and set temperature on the lower row. Operating functions include fixed-temperature operation, timed operation, automatic stop, and a 0–9999-minute timer with timing-wait function. Additional functions include sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, and power-off parameter memory. A high-precision K-type sensor and over-temperature sound-and-light alarm support temperature monitoring and safety.
Why Choose Labotemp High Temperature Forced Air Drying Oven FOV-31?
✓ High-Temperature Heating: Operating range up to 600°C.
✓ 150 L Chamber Capacity: Accommodates up to seven shelves.
✓ Two-Section PID Control: Provides touch-button settings and dual-row LCD temperature display.
| No. | Specification | Value |
|---|---|---|
| General Information | ||
| 1 | Product Type | High Temperature Forced Air Drying Oven |
| 2 | Model | FOV-31 |
| 3 | Circulation Mode | Forced Convection |
| Operating Parameters | ||
| 4 | Temperature Range | Room Temperature +20°C to 600°C |
| 5 | Temperature Resolution | 0.1°C |
| 6 | Temperature Motion | ±0.5°C |
| 7 | Temperature Uniformity | 2.50% |
| Chamber and Construction | ||
| 8 | Inner Chamber Material | SUS309S Stainless Steel |
| 9 | Outer Shell | Cold-Rolled Steel with Electrostatic-Sprayed Exterior |
| 10 | Insulation Layer | Alumina Silicate Fibre |
| 11 | Heater | SUS304 Stainless Steel Electric Heat Tube |
| 12 | Door Seal | Ceramic Fibre |
| 13 | Circulation System | High-Temperature-Resistant Circulating Fan |
| 14 | Exhaust Hole | Ø35 mm Top Exhaust Hole with Test-Hole Function |
| Controller and Display | ||
| 15 | Temperature Control Mode | Two-Section PID Control |
| 16 | Temperature Setting Mode | Touch-Button Setting |
| 17 | Temperature Display Mode | Measured Temperature on Upper LCD Row; Set Temperature on Lower Row |
| 18 | Timer | 0–9999 Minutes with Timing-Wait Function |
| 19 | Operation Functions | Fixed Temperature Operation, Fixed Timing Operation, Automatic Stop |
| 20 | Additional Functions | Sensor Deviation Correction, Temperature Overshoot Self-Tuning, Internal Parameter Locking, Power-Off Parameter Memory |
| 21 | Sensor | High-Precision K-Type |
| Safety Features | ||
| 22 | Safety Device | Over-Temperature Sound-and-Light Alarm |
| Capacity and Dimensions | ||
| 23 | Chamber Volume | 150 L |
| 24 | Inner Chamber Dimensions (W × L × H) | 500 × 500 × 600 mm |
| 25 | Exterior Dimensions (W × L × H) | 931 × 679 × 939 mm |
| 26 | Packing Dimensions (W × L × H) | 1051 × 860 × 1230 mm |
| 27 | Maximum Shelf Number | 7 |
| 28 | Load Per Rack | 15 kg |
| 29 | Shelf Spacing | 45 mm |
| Electrical Requirements | ||
| 30 | Power Rating | 4.8 kW |
| 31 | Current Rating (50/60 Hz) | AC 380 V / 7.3 A |
| Weight | ||
| 32 | Net Weight | 80 kg |
| 33 | Gross Weight | 95 kg |
Laboratory Sample Drying: Supports controlled drying of laboratory samples using forced-air circulation at elevated temperatures.
High-Temperature Heating: Supports laboratory processes requiring operating temperatures up to 600°C.
Thermal Processing: Provides controlled heating for laboratory materials and samples within its specified temperature range.
Temperature-Controlled Laboratory Work: Supports fixed-temperature and timed heating operations through its PID controller.
