Labotemp 1200°C Atmosphere Furnace FMU-26 supports high-temperature thermal processing in laboratory and industrial environments. Featuring a 16 L chamber with internal dimensions of 200 × 400 × 200 mm, this furnace reaches a maximum temperature of 1200°C for up to 2 hours and supports continuous operation at 1100°C. Applications include ashing, calcination, ignition testing, gravimetric analysis, and other high-temperature heat treatment processes.
Equipped with HRE heating wire arranged for two-sided heating, the FMU-26 features a Yudian 50-segment PID controller with automatic tuning for programmable temperature control. The high-alumina ceramic fiber chamber, N-type thermocouple, and sealed chamber design support consistent thermal processing. Additional features include a vertically opening door, top exhaust vent, air cooling, overheat protection, and power failure protection. Temperature accuracy of ±1°C and temperature uniformity of ±5°C support precise heating performance.
Why Choose Labotemp 1200°C Atmosphere Furnace FMU-26?
✓Programmable Temperature Control: The 50-segment PID controller with automatic tuning supports flexible temperature programming.
✓Reliable High-Temperature Performance: Reaches 1200°C for short-duration processes and supports continuous operation at 1100°C.
✓Enhanced Operational Safety: Overheat and power failure protection help safeguard furnace operation.
| No. | Specification | Value |
|---|---|---|
| General Specifications | ||
| 1 | Product Name | 1200°C Atmosphere Furnace |
| 2 | Model | FMU-26 |
| 3 | Furnace Type | Atmosphere Furnace |
| 4 | Chamber Capacity | 16 L |
| 5 | Chamber Dimensions (W × D × H) | 200 × 400 × 200 mm |
| 6 | Maximum Temperature | 1200°C (≤2 hours) |
| 7 | Continuous Working Temperature | 1100°C |
| 8 | Temperature Accuracy | ±1°C |
| 9 | Temperature Uniformity | ±5°C |
| 10 | Heating Rate | ≤25°C/min |
| Heating and Temperature Control | ||
| 11 | Heating Element | HRE Heating Wire |
| 12 | Heating Arrangement | Two-Sided Heating |
| 13 | Temperature Controller | Yudian 828, 50-Segment Controller |
| 14 | Control System | PID Automatic Control with Auto-Tune Function |
| 15 | Thermocouple | Type N |
| 16 | Temperature Measurement | Single-Point Measurement |
| 17 | Temperature Monitoring Location | Center of the Back Wall |
| Chamber and Construction | ||
| 18 | Chamber Material | High-Alumina 1600# Ceramic Fiber Board |
| 19 | Furnace Shell | Dual Carbon Steel Shell with Environmental Powder Coating |
| 20 | Door Design | Vertical Opening |
| 21 | Sealing Design | Chamber Sealed from Outside to Inside |
| 22 | Exhaust System | Exhaust Vent on the Top of the Furnace |
| 23 | Cooling Method | Air Cooling |
| Electrical Specifications | ||
| 24 | Power Supply | 220 V, 50 Hz, Single Phase |
| 25 | Rated Power | 3 kW |
| 26 | Electrical Components | Schneider |
| 27 | Operating Ambient Temperature | 0°C to 50°C |
| 28 | Operating Relative Humidity | ≤90% |
| Safety and Protection | ||
| 29 | Overheat Protection | Automatically Shuts Down the Furnace When the Temperature Exceeds the Acceptable Range |
| 30 | Power Failure Protection | Resumes Furnace Operation After Power Is Restored |
| 31 | Temperature Control Protection | Microprocessor-Based Self-Tuning PID Control |
Suitable for determining the ash content of materials through high-temperature heating.
Used for thermal decomposition and heat treatment of materials.
Suitable for laboratory ignition tests involving controlled high-temperature exposure.
Supports analytical procedures requiring heating samples for mass determination.
Used to remove wax from materials during thermal processing.
Suitable for firing ceramic and glass seals.
Used for high-temperature heat treatment of steel components.
Designed for heat-treatment applications requiring a controlled gas environment.
