Labotemp Debinding Furnace LDB-202 supports debinding processes requiring high-temperature control in a compact chamber. Its 3 L chamber measures 150 × 150 × 150 mm and reaches a maximum temperature of 1700°C within a stated period of ≤2 hours. Working temperature reaches 1600°C for 24/7 operation. MoSi₂ heating rods positioned on two sides provide heating, while high-alumina ceramic fiber insulation supports chamber heat retention. Temperature accuracy is ±1°C, temperature uniformity is ±5°C, and heating rate is ≤10°C/min. Temperature measurement uses a single-point method, tested at back-wall center.
Manually controlled inlet and exhaust air system with fan works alongside a secondary combustion system to dilute exhaust gases generated during debinding. Fresh-air injection creates overpressure during debinding, supporting prevention of an inflammable atmosphere in the chamber. A Yudian 50-segment controller provides PID automatic control and auto-tune function. The furnace includes a B-type thermocouple, side-opening door, dual carbon-steel shell with environment powder coating, and air cooling. Power requirement is 380V, 50Hz, three-phase, 9kW. Operating conditions are ambient temperature 0–50°C and relative humidity ≤90%. Electrical components are Schneider; overheat and power-failure protection are specified. Power-failure protection resumes operation from point of interruption after power returns.
Why Choose Labotemp Debinding Furnace LDB-202?
✓ High-Temperature Capability: Maximum temperature of 1700°C
✓ Specified Thermal Performance: ±1°C accuracy and ±5°C uniformity
✓ Debinding Gas Management: Manual inlet/exhaust airflow and secondary combustion system
| General Information | |
|
Model : LDB-202 Model |
LDB-202 |
|
Chamber Volume : 13 L Chamber Volume |
13 L |
|
Chamber Size : W180 × D400 × H180 mm Chamber Size |
W180 × D400 × H180 mm |
| Operating Parameters | |
|
Maximum Temperature : 1700°C, ≤2 hours Maximum Temperature |
1700°C, ≤2 hours |
|
Working Temperature : 1600°C, 24/7 Working Temperature |
1600°C, 24/7 |
|
Heating Rate : ≤10°C/min Heating Rate |
≤10°C/min |
|
Temperature Accuracy : ±1°C Temperature Accuracy |
±1°C |
|
Temperature Uniformity : ±5°C Temperature Uniformity |
±5°C |
|
Temperature Measurement : Single-point measurement Temperature Measurement |
Single-point measurement |
|
Temperature Monitoring Location : Tested at back-wall center Temperature Monitoring Location |
Tested at back-wall center |
|
Cooling Method : Air cooling Cooling Method |
Air cooling |
| Heating and Construction | |
|
Heating Element : MoSi₂ rods, two-side heating Heating Element |
MoSi₂ rods, two-side heating |
|
Thermocouple : B type Thermocouple |
B type |
|
Furnace Door : Side open Furnace Door |
Side open |
|
Furnace Shell : Dual carbon steel shell, environment powder coating Furnace Shell |
Dual carbon steel shell, environment powder coating |
|
Chamber Material : High-alumina 1800# ceramic fiber board (Mitsubishi, Japan) Chamber Material |
High-alumina 1800# ceramic fiber board (Mitsubishi, Japan) |
| Control and Air System | |
|
Temperature Controller : Yudian, 50 segments Temperature Controller |
Yudian, 50 segments |
|
Controller Functions : PID automatic control and auto-tune Controller Functions |
PID automatic control and auto-tune |
|
Exhaust Device : Inlet and exhaust air system with fan, manual control Exhaust Device |
Inlet and exhaust air system with fan, manual control |
|
Afterburner : Secondary combustion system Afterburner |
Secondary combustion system |
| Electrical Requirements | |
|
Power Supply : 380V, 50Hz, three phase Power Supply |
380V, 50Hz, three phase |
|
Power : 9kW Power |
9kW |
| Operating Conditions | |
|
Ambient Temperature : 0–50°C Ambient Temperature |
0–50°C |
|
Relative Humidity : ≤90% Relative Humidity |
≤90% |
| Safety Measures | |
|
Overheat Protection : Shuts down furnace when temperature exceeds acceptable range Overheat Protection |
Shuts down furnace when temperature exceeds acceptable range |
|
Power-Failure Protection : Resumes furnace operation from point of failure after power is reestablished Power-Failure Protection |
Resumes furnace operation from point of failure after power is reestablished |
| Package Information | |
|
Package Dimensions : W830 × D1150 × H1430 mm Package Dimensions |
W830 × D1150 × H1430 mm |
|
Gross Weight : 420 kg Gross Weight |
420 kg |
|
Packing : Standard export plywood box Packing |
Standard export plywood box |
Working Temperature: 1600°C, 24/7
Thermocouple: B Type
Temperature Uniformity: ±5°C
Temperature Measurement: Single-Point
Working Temperature: 1600°C, 24/7
Thermocouple: B type
Temperature Uniformity: ±5°C
Temperature Monitoring Location: Tested at back-wall center
Time from Room Temp. to Max Temp. (min): 60
Temperature Setting Mode: Touch four keys
Temperature Resolution: 1°C
Temperature Fluctuation: ±5°C
Time from Room Temp. to Max Temp. (min): 70
Temperature Setting Mode: Touch four keys
Temperature Resolution: 1°C
Temperature Fluctuation: ±5°C
Time from Room Temp. to Max Temp. (min): 75
Temperature Setting Mode: Touch four keys
Temperature Resolution: 1°C
Temperature Fluctuation: ±5°C
Weight: 130 – 150 kg
Voltage: 110 V
Time to Max Temperature: 30 – 50 minutes
Thermocouple Type: Type K
Timing: 0–999 hours
Temperature Rising Time: 60±5 minutes
Temperature Resolution: 1°C
Temperature Controller: Touch Screen
Time from Room Temp. to Max Temp. (min): 80
Temperature Setting Mode: Touch four keys
Temperature Resolution: 1°C
Temperature Fluctuation: ±5°C
Time from Room Temp. to Max Temp. (min): 80
Temperature Setting Mode: Touch four keys
Temperature Resolution: 1°C
Temperature Fluctuation: ±5°C
Time from Room Temp. to Max Temp. (min): 80
Temperature Setting Mode: Touch four keys
Temperature Resolution: 1°C
Temperature Fluctuation: ±5°C
Timer: 0–99 h 59 min (programmable timing)
Temperature Setting: Touch button setting
Temperature Resolution: 1°C
Temperature Range: 100°C – 1200°C
Voltage: AC 220V 50Hz
Thermocouple: Type N
Temperature Accuracy: ±1°C
Structure: Bench-top, front loading
Working Temperature: 1100°C, 24/7
Thermocouple: Type N
Thermal Parameters:
Temperature Uniformity: ±5°C
Volume: 4L
Timer : 0–9999 min
Temperature Setting Mode : Touch
Temperature Resolution : 1℃
Volume : 12L
Timer: 0–9999 min
Temperature Setting Mode: Touch
Temperature Resolution : 1℃
Volume : 20 L
Timer: 0–9999 min
Temperature Setting Mode: Touch
Temperature Resolution : 1℃
Volume : 36 L
Timer: 0–9999 min
Temperature Setting Mode: Touch
Temperature Resolution : 1℃
Volume : 4 L
Voltage: AC 220V 50Hz / 240V 60Hz
Timer: 0–9999 min
Temperature Setting Mode: Touch
Volume : 12 L
Timer: 0–9999 min
Temperature Setting Mode: Touch
Temperature Resolution : 1℃
Volume : 20 L
Timer: 0–9999 min
Temperature Setting Mode: Touch
Temperature Resolution : 1℃
Volume : 36 L
Timer: 0–9999 min
Temperature Setting Mode: Touch
Temperature Resolution : 1℃
Timer: Standard: 0–9999 min; P Type: 0–99 h 59 min; PL Type: 0–9999 min
Temperature Rise Time: ≤140 min
Temperature Resolution Ratio: 1°C
Temperature Range: 1700°C
Temperature Sensor: B-Type Thermocouple
Temperature Control: 50-Segment Programmable Digital PID Controller
Temperature Accuracy: ±1 °C
Technical Specifications:
Temperature Sensor: B-Type Thermocouple
Temperature Control: 50-Segment Programmable Digital PID Controller
Temperature Accuracy: ±1 °C
Technical Specifications:
Temperature Sensor: Thermocouple
Temperature Controller: Digital PID Controller
Temperature Control Accuracy: ±1°C
Safety Protection: Over-Temperature Protection
Voltage: AC 220V, 50HZ
Thermocouple: Type K
Temperature control accuracy: ±1℃
Safety protection features: Protection for temperature deviation, over-temperature warning, phase-loss warning, and over-flow protection
Voltage: AC 220V, 50HZ
Thermo couple: Type K
Temperature control accuracy: ±1℃
Safety protection features: Protection for temperature deviation, over-temperature warning, phase-loss warning, and over-flow protection
Voltage: AC 220V, 50HZ
Thermo couple: Type K
Temperature control accuracy: ±1℃
Safety protection features: Protection for temperature deviation, over-temperature warning, phase-loss warning, and over-flow protection
Voltage: AC 220V, 50HZ
Thermo couple: Type K
Temperature control accuracy: ±1℃
Safety protection features: Protection for temperature deviation, over-temperature warning, phase-loss warning, and over-flow protection
Thermocouple: Type N
Temperature Uniformity: ±5°C
Temperature Monitoring Location: Center of the Back Wall
Temperature Measurement: Single-Point Measurement
Thermal Insulation: External Surface Temperature < 45°C
Temperature Accuracy: ±5°C
Standard Working Temperature: 538°C
Secondary Combustion Chamber Temperature: 900°C
Weight Monitoring: Continuous Electronic Balance Monitoring
Test Accuracy: ±0.11%
Temperature Control: Programmable Automatic Control
Sample Mass Capacity: Standard: 1200–1800 g; Maximum: 5000 g
